Instructions for use
1. Remove the cap from the tube and screw on the nozzle. Cut off the tip of the nozzle.
2. Take care to ensure that the surfaces to be cemented are absolutely clean and dry before applying the silicon.
3. A dry skin forms on the surface of the silicone after just a few minutes. The silicone is firm after approx. one hour. Wait for 24 hours before filling the aquarium with water as only then will the silicone be fully hardened.
4. The tube must always be sealed well.
5. Only use in a well ventilated room to avoid the risk of eye irritation due to acetic acid separating off. Always wash your hands after use. Avoid eye contact.
6. Silicone must be kept out of children's reach.
7. fresh silicone can be removed with Acelan or similar solvents. Fully hardened material can only be removed by physical means.